-
Q How much floor space does the HSCJ-B save?
A The saving is in the unwind section: one roll position instead of two or more. Web guiding, slitting, servo cutting, automatic collection and touchscreen control are all the same as on the standard machine. Send us your floor dimensions and we will confirm the layout fits.
-
Q What is the difference between HSCJ-B and HSC-B?
A The unwind. The HSCJ-B takes one roll and runs 50–550 g/m². The HSC-B takes two, four or six, which extends the range down to 30 g/m² and cuts more webs in the same pass. If floor space is your constraint, the HSCJ-B; if light papers or volume are, the HSC-B.
-
Q Can it handle thicker board?
A The supplied PDF states that the redesigned motor-driven de-curler enables practical operation with thick board up to 500 gsm. Final suitability depends on board structure and should be tested or confirmed.
-
Q How fast does the HSCJ-B run?
A Up to 350 cuts/min, with line speed capped at 300 m/min. Which limit you reach depends on cutting length: below about 857 mm the cut rate is the ceiling, above it the line speed is. Light papers in practice run below these figures, because web stability rather than drive capacity becomes the limiting factor.
-
Q What is the difference between the HSCJ-B and the HSCJ-D?
A Cutting frequency: 350 cuts/min against 400. Both are capped at 300 m/min. Everything else is identical.
-
Q Which options can be added?
A Two: The Color Code Sensor and the Dedusting Roller. The automation systems on the double rotary range are not offered on single-knife machines.
-
Q What do you need to quote an HSCJ-B?
A Paper type and basis weight, roll diameter, weight and width, how many webs you want to run, cutting length, finished width, slitting format, output target, stack requirement, power supply, factory layout and destination.
